Water Underfloor Heating Systems
Controlling the System
The Water Underfloor Heating System provides individual room temperature control through a wide range of electrical systems from standard 230v thermostat controls through to RF & network control options.
Dedicated UFH wiring centres located next to the manifold provide one location for all the UFH wiring, simplifying connection.
The thermostat series really does offer you everything. Intuitive touchscreen operation as well as a WiFi connection, providing you with local and remote access of your home heating from anywhere!
Don't settle for anything less...
Select a type of thermostat:
WiFi Thermostats
The Heatmiser WiFi Touchscreen series of thermostats enable you to control your heating system from anywhere in the world via a web browser or our iPhone app.
Our WiFi series are powered by 230v and offer volt free switching.
Looking to Upgrade your existing thermostat ?
Providing your have at least three wires, excluding earth, then you can upgrade your existing thermostat to our DT-TS or PRT-TS WiFi Thermostat. 4 wires are required for our PRTHW-TS WiFi model.
5/2 Day & 7 Day Programmaing 5/2 Day mode is ideal for those who keep to one schedule Monday-Friday and another for the weekend. 7 Day mode allows you to have different schedule for each day of the week - ideal for families with changing schedules. No need to decide now, our thermostat offers both modes for you to select later.
Adjustable Switching Differential Our Touchscreen Series has an adjustable switching from 0.5C to 3C This function allows you to get even tighter control of your heating system.
Frost Protection A function designed to protect your home against frost. An adjustable frost temperature level can be programmed, between 7-17C, ensuring your home is protected against the elements whilst you are away.
Keylock Function - Locking the thermostat keypad is an easy way to save energy. Allowing access to only those that require it.
Web Browser Interface
Your WiFi Thermostat can be controlled locally within your home from your PC Web browser, and remotely from anywhere in the world. For remote access, your router requires port forwarding facility and a fixed IP address from your ISP. If you do not have a fixed IP, you can use a Dynamic DNS service such as that provided by DynDNS.org
Mobile App's
You can control your themostat using a mobile phone application that can be downloaded and used on either iPhone's or Android phones. More information can be found here for iPhones and here for Android phones.
Wireless Thermostats
Slimline Wireless Thermostat
The Heatmiser Slimline Wireless Thermostat series incorporate replaceable batteries, and are surface mounted for easy installation. A variety of models are available in this series to suit most applications.
Wiring a conventional thermostat often includes lifting floor boards or chasing out plaster work. Our wireless thermostats offer an effective alternative, and are the ideal choice for extensions or when you are looking to relocate your thermostat.
Relocate - Many thermostats are sited incorrectly, causing your boiler to come on more than necessary.
A wireless thermostat allows you to move your thermostat to a more suitable position, without the need to run additonal cables. What's more, our Touchscreen models have a desk stand, enabling you to move the thermostat around the house with you.
Fail Safe - A loss of wireless connection could leave your home vulnerable to frost damage. The fail safe function enables the heating for 20% of the time, ensuring the temperature in your home does not drop to dangerous levels.
Locking Facility - A simple way to reduce tampering of the system settings and standard across our wireless thermostat series.
Electric Floor Heating - The electric floor heating models are capable of switching up to 16A and use a floor limiting sensor to protect the floor surface.
Replaceable Batteries - The Wireless Slimline Thermostat series uses replaceable AAA batteries.
Touchscreen Wireless Thermostats
The Heatmiser Touchscreen Wireless Thermostat series incorporate a rechargeable battery, and can be wall or desk mounted for easy installation. A variety of models are available in this series to suit most applications.
Wiring a conventional thermostat often includes lifting floor boards or chasing out plaster work. Our wireless thermostats offer an effective alternative, and are the ideal choice for extensions or when you are looking to relocate your thermostat.
Relocate - Many thermostats are sited incorrectly, causing your boiler to come on more than necessary.
A wireless thermostat allows you to move your thermostat to a more suitable position, without the need to run additonal cables. What's more, our Touchscreen models have a desk stand, enabling you to move the thermostat around the house with you.
Rechargeable Battery - Our wireless Touchscreen Series incorporates a rechargeable battery, saving money on replacement batteries. A USB recharge cable is provided and an optional plug-in charger is available.
Fail Safe - A loss of wireless connection could leave your home vulnerable to frost damage. The fail safe function enables the heating for 20% of the time, ensuring the temperature in your home does not drop to dangerous levels.
Locking Facility - A simple way to reduce tampering of the system settings and standard across our wireless thermostat series.
Electric Floor Heating - The electric floor heating models are capable of switching up to 16A and use a floor limiting sensor to protect the floor surface.
Multi Zone Versions - The models with UWTS in the part number can work with the UH1-W wiring centre, offering a multi zone wireless system. They can also operate on the same system as the Slimline wireless thermostats enabling you to have Touchscreen models in selected rooms and Slimline in the remaining.
Wall or Desk Mount The Wireless Touchscreen has a wall plate or can be desk mounted by use of the integrated desk stand.
Wired Thermostats - Dial Type
Heatmiser DS1 - Surface mount with LED Indication
Surface Mount for easy installation - The DS1 is surface mounting for easy installation. Modern styling remains, in keeping with the rest of the Heatmiser Range.
Power and Heating Indication - The DS1 series provides power and heating on indication in the form of LEDs.
Heatmiser DS1-L - Surface mount with LCD
Dial Lock Facility - The DS1-L series offers a dial lock, allowing you to reduce tampering of the heating system. A simple way of reducing your energy costs.
LCD Temperature Readout - The DS1-L is equipped with an LCD. A turn of the dial will display the set temperature for 5 seconds before reverting back to the actual room temperature readout.
Heatmiser DS-SB - Set Back Thermostat
Set Back Function - Standard dial thermostats are either on or off according to the time clock controlling the system. A set back thermostat is different. It will follow the temperature set on the dial during the timed period and will automatically reduce the set temperature by 4C when its timed to be off.
On/Off Time Clock Switch - A slide switch on the side of the thermostat allows you to switch between On, Permanent, Off or Time Clock. In On mode, the thermostat will maintain the set temperature on the dial, but will ignore the time clock input.
Wired Thermostats - Battery Thermostats
Our Slimline Battery Powered Thermostat series are surface mounting for easy installation.
These thermostats are perfect for those installations that only have 2 wires.
Heatmiser DT-B - Non Programmable
- Non Programmable
- Frost protection
- Keylock
- 05-35C Temperature Range
- Blue Back Light
- Uses 2 AAA Batteries
Heatmiser PRT-B - Programmable
This model combines a programmer and thermostat into one stylish unit. This battery powered programmable thermostat offers;
- Weekday/Weekend Programming or 7 Day Programming
- Hold Function
- Holiday Function
- Frost protection
- Keylock
- 05-35C Temperature Range
- Blue Back Light
- Uses 2 AAA Batteries
Wired Thermostats - Slimline Thermostats
Our range of slimline thermostats covers three ranges and caters for most applications. This series of thermstat is flush mounting, resulting in a depth of 13mm after installation.
230v Models can be used to upgrade existing thermostats and can be used in conjunction with our UH2, UH3 wiring centres.
12v Network Models have been designed to work as part of a network system, and can be used in conjunction with our UH1 wiring centre and network products. Models with -N in the part number are the network versions.
Electric Floor Models These models are supplied with a remote sensor and offer the ability to measure room temperature, floor temperature or both. The PRT-E is rated at 16A making it ideal for electric floor heating.
Energy Saving Optimum Start Most home owners manually allow for a heat up time when programming their heating system. This manual method does not allow for seasonal changes. Optimum start is an energy saving feature that calculates the amount of heat up time required to ensure your home is warm when you wake and return home from work. The thermostat will automatically adjust the heat up time throughout the year, saving you energy.
Temperature Hold Facility - This function allows you to hold a set temperature for a specific duration - ideal for parties. After the hold duration, the thermostat will revert back to to programmed setting.
Holiday Function - The holiday function reduces the set temperature in your home for the duration of your holiday. At the end of your holiday, the thermostat will revert back to the programmed setting,ensuring your home is warm on your return.
Optional Remote Control - All models within our slimline series are compatible with our Infrared remote control (RM1)
Temperature Override - The override facility allows you to adjust the desired temperature in your home without the need to fully re-program the thermostat. This new set temperature will be maintained until the next programmed setting. An override limit function allows you to limit the use of temperature override keys.
Wired Thermostats - Touchscreen
The Touchscreen series of thermostats have been designed to make life a little easier. The intuitive touchscreen display makes searching for the user manual a thing of the past.
Three ranges:
230v Models can be used to upgrade existing thermostats and can be used in conjunction with our UH2 and UH3 wiring centres.
12v Network Models have been designed to work as part of a network system, and can be used in conjunction with our UH1 wiring centre and network products.
Air/Floor Models are supplied with a remote floor sensor and provide the ability to measure room temperature, floor temperature or both. The DT-ETS and PRT-ETS offer 16A switching making them ideal for electric floor heating.
5/2 Day & 7 Day Programmaing 5/2 Day mode is ideal for those who keep to one schedule Monday-Friday and another for the weekend. 7 Day mode allows you to have different schedule for each day of the week - ideal for families with changing schedules. No need to decide now, our thermostat offers both modes for you to select later.
Adjustable Switching Differential Our Touchscreen Series has an adjustable switching from 0.5C to 3C This function allows you to get even tighter control of your heating system.
Frost Protection A function designed to protect your home against frost. An adjustable frost temperature level can be programmed, between 7-17C, ensuring your home is protected against the elements whilst you are away.
Networking Facility - Control your heating from anywhere Our 12v network thermostats offer you the ability to control your heating centrally, with the use of our Touchpad, by telephone with the TR2 and over the internet from anywhere in the world with our Netmonitor.
Keylock Function - Locking the thermostat keypad is an easy way to save energy. Allowing access to only those that require it.
Two Zone Models - Two zone versions of the PRT-TS and PRT-NTS are available (PRT2-TS and PRT2-NTS) ideal for bedrooms with ensuite. Zone one uses the built in air sensor whilst zone two uses the remote sensor probe provided. The remote sensor probe can be placed inside our sensor housing.
Multi Zone Systems
Base Level Underfloor Heating System
The base level heating system offers simple but effective control of up to 8 zones.
The UH3 wiring centre is the hub of this system and is designed to work with our 4 channel 230v Time Clock (TM4) and 230v Set Back Thermostat (DS-SB) On board the UH3 are two heating time channels. Each zone allows you to specify which time channel it should follow.
Two additonal time channel connections are provided for hot water control or other auxiliary devices.
Set Back Function: The set back function is a simple way of reducing energy costs by automatically reducing the set temperature when the heating is timed to be off. Standard dial thermostats are either on or off according to the time clock controlling the system. A set back thermostat is different. It will follow the temperature set on the dial during the timed period and will automatically reduce the set temperture by 4C when its timed to be off.
Click the diagram to zoom in
Wireless System - 8 Zone Underfloor Heating
The wireless system compatible wireless thermostats and is designed to offer an easy to install and operate system. Communication between the thermostat and wiring centre is achieved by reliable RF (radio frequency) communication, using the 868MHz frequency band. This means, the installer only needs to wire the boiler, pump and actuator connections, which are normally all local to the wiring centre.
Wireless System - Deluxe Level Water Underfloor Heating System
The deluxe system uses our 12v Network Thermostats to create a truly flexible and expandable system. It offers the ability to control your heating centrally, with the Touchpad and remotely with the use of Netmonitor and PCLink.
Contact Us for Further Assistance
If you are considering having water based underfloor heating installed in your home or commercial premises why not contact us and let us take you through the process one step at a time.
