ECOFLEX Ice Prevention & Snow Melting Cable


Clear walkways
pavements and drives.


In the winter months, serious injury can occur from the formation of ice on work platforms in warehouse loading bays or on entrance walkways to busy public buildings etc. This potential hazard can easily be minimised by installing an ice prevention system.

ice prevention and snow melting before and after photos ice prevention and snow melting kit photo

In the case of snow fall, an ice prevention system will quickly melt any snow that falls providing clear, access for pedestrians and vehicles on pavements and drives.

MPSV heating cables are rated at 20 Watts/m and used for ice and snow melting of outdoor areas and other applications where the cable is embedded in concrete.

The most common application in industry is heating of ramp or loading platforms in factories and warehouses, where an ice prevention system can reduce the risk of accidents and ensure work can be carried out at all times. There are however a variety of applications for ice and snow melting. All these applications can be kept free from ice and snow so heavy salting and snow shovelling are avoided. These include: car parks; garage drive ways; pavements and outdoor steps.


  • Approved to IEC 60800
  • 20W/m provides clear, safe access for pedestrians and vehicles on pavements and drives.
  • Tough & durable heating cable
  • Suitable under concrete, paviours and asphalt


  • 4.8-5.6mm thick heating cable with UV protective outer insulation
  • 230V supply, IP 67 Rated
  • Single conductor cable with full screen protection
  • Power loading - 20W/m
  • 2 x 5m cold connection leads Temperature range - -20oC up to + 80oC

Thought about installing underfloor heating?

We can save you the hassle...

installating underfloor heating Installation Service